CT Contrast Media Injector
Shine-E CT Injector: Elevating Diagnostic Precision in CT Scans and Angiography
Specification
Electrical Requirements |
a.c.198~242V, 50/60Hz, 200VA |
Operation Interface |
Selectable in English, French, German, and Chinese |
Flow Rate |
0.1 mL/sec. to 10 mL/sec. in 0.1 mL/sec. increments |
Syringe Capacity |
100ml for Shine-C10; 200ml for Shine-C20 |
Volume |
0.1 ml to syringe capacity in 0.1 ml increments |
Characteristic
The Shine-E CT injector is controlled by a computer system. It takes advantage of specialized syringes and other accessories, so the cost of injection is very low. The delivery rate and volume satisfy all the criteria required by an enhanced CT scan.
● The highest delivery rate: 9.9ml/s, the lowest delivery rate: 0.1ml/s. The large range of rate from 0.1ml/s to 9.9 ml/s satisfies all of the requirements for any enhanced CT scan. One to four-phase injections meet a variety of CT injection needs.
● Large-size disposable syringe meets various requirements for the volume of any enhanced CT scan.
● The highest pressure limit increases the safety of the process
● Relay input/output interface connects to different CT scan facilities in the safest manner.
● Small diameter pipe tube reduces the waste of contrast agent; and synonizes the delivery of contrast agent and scan.
● Long-distance control box enables the user to monitor it in either the control room or scanning room.
User-friendly Operations
● Programming complex protocols easily on a 12" wide touch screen of the console
● Performing all operations conveniently either on the console or on the injector arm
● Smart buttons of different functions make operation simply
Reliability & Safety
● High precision of flow rate and volume of injection
● Comprehensive real-time monitoring of the pressure and system operating states
● Remote control of injection to reduce the radiation harmful to the operators
● Air expelling lock and warning before injections to reduce risk of air embolism
Scientific & Humanized Design
● The injector arm's height and direction are adjustable.
● The pedestal can be moved and locked randomly at the expected place.
● The accessary tray frees the user's hands to focus on the operation.
Multi-purpose functionality
● Designed for use in multiple imaging environments, including CT, Peripheral Vascular Surgery, Mammography, HSG, IV Urography, and more
Specification
Technical specification |
Description |
Electrical Requirements |
220VAC/110VAC, 50 or 60Hz, 200VA |
Operation Interface |
Available in English, French, Spanish, German and Chinese |
Flow Rate |
0.1-10 ml/sec. in increments of 0.1 ml/sec. |
Syringe Capacity |
100ml for Shine-C10: 200ml for Shine-C20 |
Volume |
0.1 ml to syringe capacity in 0.1 ml increments |
Pressure |
Preset limit: 300 psi default, user settable from 50 to 350 psi in 1 psi increments Display: Real-time pressure curve Change threshold: Stop injection if pressure changes suddenly Alarm: Voice alarm and stop injection when over preset limit |
Injection or Scan Delay |
0 to 3599 seconds in 1 sec. increments |
Autofill |
Settable flow rate from 3 - 8ml/sec., volume from 10ml to syringe capability |
Multi-Phase |
1-8 phases per injection |
Pause Phase |
0~999 sec. in 1 sec. increments |
Hold Capability |
More than 30 minutes |
Storage Capabilities |
1000 protocols |
Expel air locked |
Unable to inject unless expelling air |
Test injection |
Settable flow rate from 0.1 - 5ml/sec., volume from 0. 1 - 10ml |
Heat maintainer |
35-38 C(optional)| |
Hand switch |
Hand switch control pause and continue injection (optional) |
Emergency stop function |
Clicking anywhere on the touch screen of the console or pressing any button on the injector arm to stop protocol injection |
Dimension |
Injecter Arm and Pedestal: L: 22.8* (58.0cm), W: 12.5° (20.1cm), H: 50.2 (127.5cm) Console: L: 4.55° (11.55cm), W: 12.68 (31.8cm), H: 9.77* (24.81cm) Main controller: L: 11.9° (30.2cm) W: 7.4 (9.1cm) H: 4.7° (12cm) |
Weight |
Injector Arm and Pedestal: 16.5Kg Console: 4.1Kg Main Controller: 6.2Kg |
Cooperation
